Stack Inspection

What You Should Know: How does Stack Inspection work?

Stack inspection is one way to be sure that your facility does not come to a standstill due to system failure. Having your stack inspected regularly monitored and inspected is one sure to identify potential problems and ensure they are fixed before they turn to structural failures. Therefore, it is good to professionals for technical stack inspections.

When it comes to choosing the right experts, it is wise to consider the services they offer such as video and photograph recordings and chemical attack analysis. Choose professionals who understand the importance of long-lasting performance to safe operations forms the stacks. Outlined in this article is how stack inspection works.

Stacks are an integral part of an emission system and are closely scrutinized by industrial regulation agencies. Stacks should be inspected, cleaned and regularly maintained because most facilities are subject to deterioration from environmental factors and weather. The different forms of stack include brick, concrete, fiberglass reinforced plastics, and steel. Each stack requires professional video inspection and repair plan by technicians who are trained. Professionals can help whether it is deterioration in the inner coatings of the stack or external deterioration of masonry. As such, you need to hire technicians who use the most advanced techniques which can identify potential hazards and then implement repairs to avoid structural failures.

Stack inspection is performed in three classes of inspection. The first class of inspection can be performed while the stack is still in use. A technician does the inspection of the structure using binoculars while at the ground level. After that, a close-up visual inspection is then performed from an access ladder or any accessible vintage point. Also, infrared thermography can be used to check for any spot that indicates any damage. Class I inspection is conducted one time in a year to identify potential hazards that could be expensive in the long-run.

The class II inspection is performed with the stack, not in use. At this class, rope access techniques are used to look at the outside and the inside of the structure. A rigging is installed at the top of the stack. A technician then descends the elevation of the stack on both the inside and outside, noting and documenting the current conditions of the structure. The liner and the annulus are inspected thoroughly. This class also includes installing crack monitoring devices on brick or concrete chimneys, assessment of acid attack, and nondestructive assessment of FRP liners.

The third and the last class, Class III, are associated with specific circumstances requiring in-depth and expansive assessment of a structure to ensure stability and safety. For instance, stacks that have developed problems or were damaged due to weather, overheating, explosions, earthquakes, or natural disasters should see a class III inspection performed to see to it that the facility does not pose any safety dangers. When it comes to class III inspection, it should be performed before any structural modifications to a liner. For example, new breechings and platforms should not be installed before a class III inspection is performed. At this class, even the Class II inspections are performed.

Leave a Reply

Your email address will not be published. Required fields are marked *